Power Battery Company power for a world of applications

Previously a manufacturer of batteries for UPS, emergency lighting, switchgear and other standby applications, Power Battery has ceased operation and we are pleased to offer critical power solutions from EnerSys, C&D Technologies and East Penn Manufacturing.

High Rate
PL Series
TL Series



Power Battery Company

The Power High-Rate and PL Series of valve regulated lead acid (V.R.L.A.) batteries have been developed and refined by Power Battery since 1972. It is the battery of choice for many OEM's and users throughout the world. There is never any need to add water to the cells and in fact all vents are factory sealed. These batteries are the ideal choice for U.P.S., emergency lighting, switchgear and other standby applications which need reliable, high rate power.

The Power "TL and Front Access CSL" batteries are the ideal choice for Telecommunication applications which require a reliable, compact and affordable solution. Our state of the art V.R.L.A. design utilizes an absorbed glass mat (A.G.M) separator technology to immobilize the battery electrolyte.

High Rate (UPS)

The POWER HIGH-RATE series of sealed batteries has been developedand refined since 1982. The design is driven by the market’s demand for reliability, performance and durability.Our product development team combines the latest materials together with state-of-the-art manufacturing processes to produce the most costeffective battery solution for today’sapplications.

Features and Benefits
  • Ten year design life in standby float service.
  • A recognized component of U.L.
  • Non-spillable valve regulated lead acid battery (VRLA) design.
  • Advanced absorbed glass mat technology (AGM) with gas recombination greater than 99%.
  • Operates at a low internal pressure.
  • Never needs watering, minimal maintenance.
  • Advanced lead tin calcium alloy, reduces grid corrosion and promotes long battery life.
  • Shock absorbent thick wall polypropylene cases.
  • Cold forged non-porous terminal bushings eliminate post leakage.
  • Thermally welded cover to case bond, eliminates both acid and electrical leaks.
  • Over-sized, through the partition inter-cell welds provide low resistance connections with minimal power loss.
  • Each cell has a low pressure safety release venting system recognized per U.L. 924.
  • Measured high vacuum acid fill reduces electrical variability between cells.
  • 100% recyclable materials.
PL SERIES (UPS)

Flooded Lead Calcium Batteries

Designed for Standby Power Applications


Features and Benefits
  • Emergency lighting
  • U.P.S. (Uninterruptible Power Supplies)
  • Switchgear
  • Life safety support
  • Telecommunications
  • Lead calcium grid alloy
  • P.V.C separator with glass mat retainer
  • Ten year design life
  • U.L. recognized flame arrestor vents (Not on the PL-5C)
  • Recommended float voltage 2.25 V.P.C. without equalize
  • 1.225 S.G.
  • Available in a dry charged condition
  • Other specific gravities available upon request ( Not on the PL-5)
TL SERIES (Telecomm)

The Power TELECOM series of sealed batteries has been developed and refined since the early 1990’s. The design is driven by the telecommunication market’s demand for reliability, quality and long life. Our development team combines the market’s demands with design optimization, precision component selection and state-of-theart manufacturing processes to produce the most cost effective battery solution for today’s telecommunication applications.

Features and Benefits
  • Ten year design life in telecom float service.
  • A recognized component of U.L.
  • Valve regulated lead acid battery (VRLA).
  • Absorbed glass mat technology (AGM) with gas recombination greater than 99%.
  • Operates at a low internal pressure.
  • Never needs watering; minimal maintenance.
  • Shock absorbent thick wall construction.
  • Advanced lead tin calcium alloy, reduces grid corrosion andpromotes long battery life.
  • Flame-retardant polypropylene case and cover compliant with U.L.94 V-0 with an Oxygen Limiting Index of greater than 28%.
  • Cold forged nonporous terminal bushings; eliminate post leakage.
  • Thermally welded case to cover bond; eliminates both acid and electrical leaks.
  • Over-sized, through the partition inter-cell welds provide low resistance connections, with minimal power loss.
  • Flame arresting, low pressure safety release venting system for individual cells, recognized per U.L. 924.
  • Measured high vacuum acid fill, reduces electrical variability between cells.
  • 100% recyclable materials.

Visit manufacturer's website for more information.